Common Drywall Patching Failures to Avoid
If you’re in the process of repairing a damaged wall or ceiling, it pays to take the time to get a drywall patching service. Otherwise, you risk common drywall patching failures that could cost you more money and time down the road. From applying too much pressure while sanding to not cutting out enough of the old drywall material, there are a number of mistakes you can make when patching drywall. Knowing what to avoid can help ensure your repair job is successful and long-lasting.
Don’t Forget to Cut Out Enough of the Old Drywall Material
When you’re cutting away the damaged drywall, be sure to cut out at least 6 inches of material around the hole you’re patching. This will ensure that the surrounding drywall is still secured and able to be patched into your new piece of drywall.
Don’t Skimp on Drywall Tape
If you don’t use enough tape, or if it isn’t applied properly, your patch won’t be secure and could start to loosen over time. Make sure you use enough tape to adequately cover the entire area where you’ve cut away old drywall and that it’s pressed firmly into place.
Don’t Use Too Much Pressure When Sanding
When sanding your patch, it’s important to use the right amount of pressure. Too much pressure can cause the drywall around the patch to start crumbling and lead to an uneven surface. Instead, apply light pressure with a piece of fine-grit sandpaper until the entire patched area is smooth.
Don’t Skip Applying Primer
Before you paint over a patched area, be sure to apply a layer of primer first. This will help ensure that the paint adheres properly and won’t start to chip or flake off over time. It’s also important to use a primer that is designed for drywall so it can properly adhere.
When it comes to patching drywall, patience pays off. Take your time measuring out the area you need to cut away and make sure you have enough of the old material cut out. Allow ample drying times for the joint compound, primer, and paint layers before moving on to the next step.
If you need a professional drywall patching service, you should call Matt Mischke Drywall LLC today. We serve clients in Spokane, WA. For inquiries, feel free to call us at (509) 499-5929 now!